Model : HDH-13
Product Description
  • For both drills and end mills. Can grind up to 13 mm tools.
  • Patented technology. 
  • Using magnetic field to drive hard nano-magnetic grinding powder to do fast rotation for grinding.
  • Remove burrs caused by tool sharpeners. Trim the chipped and sawn edges of tools due to tool sharpeners.
  • Achieving a consistent rounding, making the blade smooth, sharp, and more durable.
  • Improve the machining accuracy & surface roughness the workpiece.
  • Increase tool lifetime and reduce the probability of chipping. From real measurement, the HoningEdge can increase the tool lifetime by up to 65% comparing to the tools that have been sharpened only.
proimages/Misc/Patended2.png


DM

proimages/E-catalog/20201208_鈍化機海報_英文_封面.jpg


HoningEdge Effects

The tools treated by the HoningEdge can see amazing improvements in just a few seconds!

1.   Remove burrs caused by tool sharpeners. 

2.   Trim the chipped and sawn edges of tools due to tool sharpeners.

3.   Achieving a consistent rounding, making the blade smooth, sharp, and more durable.

4.   Improve the machining accuracy & surface roughness the workpiece.

5.  Increase tool lifetime upto 65% and reduce the probability of chipping.

proimages/HoningEdge/About/Compare_En2.jpg

 

How HoningEdge Works?

HoningEdge generate a magnetic field to drive hard magnetic nano grinding powder, and It produces a fluid-like vortex motion of the powder to grind the drill and end mill blades. It achieves the effects of burrs, trimming and passivation in a short time.

proimages/design/products/Honing/HoningEdge_En.jpg

 

How to Operate

Just 4 simple steps to make your tool perfect again.

1. Insert the tool into the clamp (a standard accessory).  

      proimages/HoningEdge/Operation/Step1.jpg        

2. Using the tool length setting base on the HoningEdge machine to adjust the insertion length, and then tighten the clamp.  

    
* The setting base for end mill is on the left side.

proimages/HoningEdge/Operation/Step2E-26.jpg  

* The setting base for drill is on the right side.
proimages/HoningEdge/Operation/Step2D-26.jpg   
      

3. Turn on the machine, insert the tool into the grinding slot, press down and start grinding. Please rotate the clamp slowly while grinding.

  * For H.S.S. tools, it takes about 10 seconds

  * For tungsten steel tools it takes about 1~2 minutes

* The grinding slot for end mill is on the left side.

proimages/HoningEdge/Operation/Step3E-26.jpg

* The grinding slot for drill is on the right side.
proimages/HoningEdge/Operation/Step3D-26.jpg

4. After finishing, please remove the tool while the machine is running to eliminate the magnetism on the tool. Then use the included brush to brush the magnetic powder attached to the tool back into the machine.

Specifications

ModelSize(LxWxH)PowerGrinding RangeWeight
HDH-13 212 x 215 x 257 mm AC 110V/220V
(50/60HZ)
Ø0.3~13mm 6.5KG
ModelStandard Accessories
HDH-13 1. ø13mm clamp x 2
2. Magnetic powder refilling bottle x 4
3. Hex wrench 4mm x 1 
4. Cleaning brush x 1 
5. Operation Manual, Fuse


Vedio